profile
Dr. Ajoy Debbarma
Assistant ProfessorDr. Ajoy Debbarma currently works at the Department of Mechanical Engineering, National Institute of Technology, Hamirpur. My research interests lie in working towards Solar Thermal Conversion System for various heating applications by integrating PV/T and Thermoelectric. My other research interest lie in working towards Cooling High Thermal Surfaces by Jet Impingement due important to Nucleate Boiling during Jet Impingement, Thin Film Gravity Driven Liquid Boiling, Boiling Liquid Separation and Behaviour.
Resume Not Available..
General Information
Name | : | Dr. Ajoy Debbarma |
Designation | : | Assistant Professor |
Department | : | Mechanical Engineering |
Qualification | : | Ph.D |
Date of Birth | : | 24/12/1987 |
Date of joining | : | 27/11/2018 |
Contact Details
Phone | : | (+91) 9402153595 |
Email ID | : | adebbarma@nith.ac.in |
Specialization
Position Held
Position | Department Name | Institute Name | Time Period |
---|
Educational Qualification
Name of the Degree | Year of Passing | Institute/University |
---|---|---|
B.Tech | 2011 | Tripura Institute of Technology, Narsingarh |
M.Tech | 2013 | National Institute of Technology, Silchar |
Ph.D | 2017 | National Institute of Technology, Silchar |
Honors & Recognitions Achieved
Sr.No. | Title | Activity | Given By | Year |
---|
Research Experience
Research Interests : | Numerical Simulation (CFD),Renewable Energy,Nuclear Safety | |
Brief Research Statement : |
Journal Publications
Year | Author(s) | Title & Vol. No. | Journal Name | Indexing (SCI) Web of Science/Scopus |
---|---|---|---|---|
2018 | Ajoy Debbarma and Krishna M. Pandey | CFD Analysis of Rewetting Behavior in Nuclear Fuel Rod Bundle with Change in Operating Conditions, Vol. No. 83 | Kerntechnik | SCI |
2016 | Ajoy Debbarma and Krishna M. Pandey | CFD analysis of rewetting of a single sector AHWR fuel cluster with changing jet directions, Vol. No. 308 | Nuclear Engineering and Design | SCI |
2016 | Ajoy Debbarma and Krishna M. Pandey | Numerical analysis on the effect of flow rates and jet diameter in rewetting vertical nuclear fuel bundle with jet impingements, Vol. No. 94 | Annals of Nuclear Energy | SCI |
2016 | Ajoy Debbarma and Krishna M. Pandey | Influence on rewetting temperature and wetting delay during rewetting rod bundle by various radial jet models, Vol. No. 81 | Kerntechnik | SCI |
2017 | Ajoy Debbarma and Krishna M. Pandey | CFD Analysis of Rewetting Temperature and Wetting Delay during Emergency Cooling of Vertical Nuclear Fuel Rod Bundle with Water Jet Impingement, Vol. 4 | Materials Today: Proceedings | Scopus |
2017 | Ajoy Debbarma and Krishna M. Pandey | CFD Study on Emergency Core Cooling of Hot Vertical Nuclear Fuel Rod Bundle by Jet Impingement, Vol. 4 | Materials Today: Proceedings | Scopus |
2017 | Gautam Choubey, K.M. Pandey, Ambarish Maji, Tuhin Deshmukhya, Ajoy Debbarma | Computational Investigation of Multi-Strut Injection of Hydrogen in a Scramjet Combustor, Vol. 4 | Materials Today: Proceedings | Scopus |
2017 | Deepak Sharma, K.M. Pandey, Ajoy Debbarma, Gautam Choubey | Numerical Investigation of heat transfer enhancement of SiO2-water based nanofluids in Light water nuclear reactor, Vol. 4 | Materials Today: Proceedings | Scopus |
2016 | Ajoy Debbarma and Krishna M. Pandey | CFD Study of Rewetting Nuclear Fuel Rod Bundle by Zig-Zag Jet Impingement, Vol. 9 | Indian Journal of Science and Technology | Scopus |
2013 | Ajoy Debbarma and Krishna M. Pandey | Numerical Analysis of Flow and Heat transfer in Sub-channel of Supercritical Water Reactor, Vol. 64 | Procedia Eng., | Scopus |
Conference Publications
Year | Author(s) | Title | Conference name with place | Indexing (SCI/Web of science/Scopus) |
---|---|---|---|---|
2013 | Ajoy Debbarma and K. M. Pandey | Numerical Analysis of the Flow and Heat Transfer in the Sub-Channel of Supercritical Water Reactor | ASME 2013 International Mechanical Engineering Congress and Exposition, San Diego, California, USA | Web of science |
2020 | L. Kishan and A. Debbarma | CFD Investigation of Rewetting behavior on a Hot Vertical Plate Surface with Coolant Jet Impingement | 3rd International e-conference on Frontiers in Mechanical Engineering and Nano Technology (ICFMET-2020), November 27-28, 2020, Organized by Sanjeevan Engineering & Technology Institute, Panhala Yashwantrao Patil Science College, Solankur. | NA |
2020 | L. Kishan and A. Debbarma | CFD Investigation on Rewetting temperature and Wetting delay during quenching of hot Surface with Jet Impingement | Online International Conference on Advances in Mechanical & Industrial Engineering (ICAMIE 2020), December 11-13, 2020, organized by School of Mechanical Engineering, Kalinga Institute of Industrial Technology (KIIT) Deemed to be University Bhubaneswar-751024, Odisha. | NA |
2021 | K. Kumar and A. Debbarma | Performance Investigation of Sinusoidal Corrugated Absorber Plate Solar Air Heater | International Symposium on Fluids and Thermal Engineering, (FLUTE 2021, 22nd July 2021), organized by Department of Mechanical Amity School of Engineering & Technology, Amity University Uttar Pradesh, Noida. | https://doi.org/10.1088/1742-6596/2178/1/012014 |
2021 | H. Dwivedi and A. Debbarma | NUMERICAL STUDY OF HEAT TRANSFER CHARACTERISTICS DURING COOLING CURVE SURFACE WITH WATER JET IMPINGEMENT | 26th National and 4th International ISHMT-ASTFE Heat and Mass Transfer Conference December 17-20, 2021, IIT Madras, Chennai-600036, Tamil Nadu, India, IHMTC2021 | DOI: 10.1615/IHMTC-2021.2510 |
2022 | L. Kishan S. Swapnil and A. Debbarma | CFD Investigation of Rewetting behavior on a Hot Vertical Plate Surface with Coolant Jet Impingement | 5th International Conference on Emerging Trends in Mechanical & Industrial Engineering (ICETMIE-2022) organized by the Department of Mechanical Engineering, The NorthCap University, Gurugram on 4 -5 March 2022. | NA |
Research Projects
Role | Project Type | Title | Funding Agency | From | To | Amount | Status | Co-Investigator | Sanction Order | Sanction Date |
---|
Research Supervision
Programme Name | Scholar Name | Research Topic | Status | Year | Co-Suprivisor(s) |
---|---|---|---|---|---|
M.Tech | D.Lavakishan | Rewetting Behaviour | Completed | 2019-2020 | |
M.Tech | Himanshu | HEAT TRANSFER CHARACTERISTICS | Completed | 2020-2021 | |
Ph.D | Sohan sharma | Thermal Storage System | Ongoing | 2020- | |
M.Tech | Kartik Kumar | Solar Air Heater | Completed | 2020-2021 | |
M.Tech | Supern Swapnil | Boiling Heat Transfer | Ongoing | 2022 | |
M.Tech | NITESH KUMAR | Solar Air Heater-Jet impingement | Ongoing | 2022 | |
M.Tech | ANURAG DIXIT | Solar PV Cooling-Turbo Ventilator | Ongoing | 2022 |
Patents
Title | Reg./Ref.No. | Date of Award/Filling | Awarding Agencies | Status |
---|
Teaching Experience
Position Held | Department and Organization | From | To | Total Experience |
---|---|---|---|---|
Assistant Professor | Mechanical Engineering, N.I.T. Hamirpur | 27/11/2018 | Till Date |
Administrative Experience
Position Held | Department and Organization | From | To |
---|---|---|---|
AFI NCC | NIT HAMIRPUR | 07/03/2019 | 02/08/2020 |
Book/Chapters Written
Type | Title | Publisher | Author(s) | ISBN/ISSN No. | Year |
---|---|---|---|---|---|
Book | CFD Analysis of Flow and Heat Transfer in Sub-Channels of HPLWR | LAP Lambert Academic Publishing | • K.M. Pandey and A. Debbarma | 978-3-659-40788-8 | 2013 |
Expert Talks
Title | Place | Year | Description of Event |
---|---|---|---|
Mesh Generation with ANSYS Meshing | Department of Mechanical Engineering, N.I.T. Srinagar | 2020 | One Week Online Short-Term Training Program on "Computational Fluid Dynamics" (17-22 August, 2020) |
Post Processing of ANSYS Results | Department of Mechanical Engineering, N.I.T. Srinagar | 2020 | One Week Online Short-Term Training Program on "Computational Fluid Dynamics" (17-22 August, 2020) |
Modeling and Simulation : Rewetting | Department of Mechanical Engineering, N.I.T. Hamirpur | 2020 | e-workshop on " Modeling and Simulation in Thermal Engineering: (30 Oct.,-03 Nov., 2020) |
Consultancy
Title of Consultancy | Client Organization | Faculty Involved | Amount(INR) | Status |
---|
International and National Exposure
Sr.No. | Title | Description |
---|
Conferences/Courses Organized
Category | Type | Title | Venue | From | To | Designation |
---|---|---|---|---|---|---|
workshop | e-Workshop | Modeling and Simulation in Thermal Engineering | NIT Hamirpur | 30/10/2020 | 03/11/2020 | Coordinator Cum Treasurer |
stc | e-STC | Emerging Aspects in Refrigeration, HVAC and Liquefaction Technologies | NIT Hamirpur | 03/01/2022 | 07/01/2022 | Coordinator |
Profile Summary



Name | : | Dr. Ajoy Debbarma |
Designation | : | Assistant Professor |
Department | : | Mechanical Engineering |
Qualification | : | Ph.D |
Phone | : | (+91) 9402153595 |
Email ID | : | adebbarma@nith.ac.in |
Profile URL | : | https://portfolios.nith.ac.in/index.php?/nith/dr-ajoy-debbarma- |
Date of Birth | : | 24/12/1987 |
Date of Joining | : | 27/11/2018 |
Specialization
Thermal Engineering, Heat Transfer, Jet Impingement Cooling, Energy conversion system
Education Qualification
Name of the Degree | Year of Passing | Institute/University |
---|---|---|
B.Tech | 2011 | Tripura Institute of Technology, Narsingarh |
M.Tech | 2013 | National Institute of Technology, Silchar |
Ph.D | 2017 | National Institute of Technology, Silchar |
Teaching Experience
Programme Name | Department And Organization | From | To | Total Experience |
---|---|---|---|---|
Assistant Professor | Mechanical Engineering, N.I.T. Hamirpur | 27/11/2018 | Till Date |
Administrative Experience
Position Held | Department And Organization | From | To |
---|---|---|---|
AFI NCC | NIT HAMIRPUR | 07/03/2019 | 02/08/2020 |
Research Experience
Research Interests : | Numerical Simulation (CFD),Renewable Energy,Nuclear Safety | |
Brief Research Statement : |
Research Projects
Role | Project Type | Title | Funding Agency | From | To | Amount | Status | Co-Investigator | Sanction Order | Sanction Date |
---|
Journal Publications
Year | Author(s) | Journal Name | Title & Vol. No. | Indexing (SCI/Web of science/Scopus) |
---|---|---|---|---|
2018 | Ajoy Debbarma and Krishna M. Pandey | Kerntechnik | CFD Analysis of Rewetting Behavior in Nuclear Fuel Rod Bundle with Change in Operating Conditions, Vol. No. 83 | SCI |
2016 | Ajoy Debbarma and Krishna M. Pandey | Nuclear Engineering and Design | CFD analysis of rewetting of a single sector AHWR fuel cluster with changing jet directions, Vol. No. 308 | SCI |
2016 | Ajoy Debbarma and Krishna M. Pandey | Annals of Nuclear Energy | Numerical analysis on the effect of flow rates and jet diameter in rewetting vertical nuclear fuel bundle with jet impingements, Vol. No. 94 | SCI |
2016 | Ajoy Debbarma and Krishna M. Pandey | Kerntechnik | Influence on rewetting temperature and wetting delay during rewetting rod bundle by various radial jet models, Vol. No. 81 | SCI |
2017 | Ajoy Debbarma and Krishna M. Pandey | Materials Today: Proceedings | CFD Analysis of Rewetting Temperature and Wetting Delay during Emergency Cooling of Vertical Nuclear Fuel Rod Bundle with Water Jet Impingement, Vol. 4 | Scopus |
2017 | Ajoy Debbarma and Krishna M. Pandey | Materials Today: Proceedings | CFD Study on Emergency Core Cooling of Hot Vertical Nuclear Fuel Rod Bundle by Jet Impingement, Vol. 4 | Scopus |
2017 | Gautam Choubey, K.M. Pandey, Ambarish Maji, Tuhin Deshmukhya, Ajoy Debbarma | Materials Today: Proceedings | Computational Investigation of Multi-Strut Injection of Hydrogen in a Scramjet Combustor, Vol. 4 | Scopus |
2017 | Deepak Sharma, K.M. Pandey, Ajoy Debbarma, Gautam Choubey | Materials Today: Proceedings | Numerical Investigation of heat transfer enhancement of SiO2-water based nanofluids in Light water nuclear reactor, Vol. 4 | Scopus |
2016 | Ajoy Debbarma and Krishna M. Pandey | Indian Journal of Science and Technology | CFD Study of Rewetting Nuclear Fuel Rod Bundle by Zig-Zag Jet Impingement, Vol. 9 | Scopus |
2013 | Ajoy Debbarma and Krishna M. Pandey | Procedia Eng., | Numerical Analysis of Flow and Heat transfer in Sub-channel of Supercritical Water Reactor, Vol. 64 | Scopus |
Conference Publications
Year | Author(s) | Conference | Title | Indexing |
---|---|---|---|---|
2013 | Ajoy Debbarma and K. M. Pandey | ASME 2013 International Mechanical Engineering Congress and Exposition, San Diego, California, USA | Numerical Analysis of the Flow and Heat Transfer in the Sub-Channel of Supercritical Water Reactor | Web of science |
2020 | L. Kishan and A. Debbarma | 3rd International e-conference on Frontiers in Mechanical Engineering and Nano Technology (ICFMET-2020), November 27-28, 2020, Organized by Sanjeevan Engineering & Technology Institute, Panhala Yashwantrao Patil Science College, Solankur. | CFD Investigation of Rewetting behavior on a Hot Vertical Plate Surface with Coolant Jet Impingement | NA |
2020 | L. Kishan and A. Debbarma | Online International Conference on Advances in Mechanical & Industrial Engineering (ICAMIE 2020), December 11-13, 2020, organized by School of Mechanical Engineering, Kalinga Institute of Industrial Technology (KIIT) Deemed to be University Bhubaneswar-751024, Odisha. | CFD Investigation on Rewetting temperature and Wetting delay during quenching of hot Surface with Jet Impingement | NA |
2021 | K. Kumar and A. Debbarma | International Symposium on Fluids and Thermal Engineering, (FLUTE 2021, 22nd July 2021), organized by Department of Mechanical Amity School of Engineering & Technology, Amity University Uttar Pradesh, Noida. | Performance Investigation of Sinusoidal Corrugated Absorber Plate Solar Air Heater | https://doi.org/10.1088/1742-6596/2178/1/012014 |
2021 | H. Dwivedi and A. Debbarma | 26th National and 4th International ISHMT-ASTFE Heat and Mass Transfer Conference December 17-20, 2021, IIT Madras, Chennai-600036, Tamil Nadu, India, IHMTC2021 | NUMERICAL STUDY OF HEAT TRANSFER CHARACTERISTICS DURING COOLING CURVE SURFACE WITH WATER JET IMPINGEMENT | DOI: 10.1615/IHMTC-2021.2510 |
2022 | L. Kishan S. Swapnil and A. Debbarma | 5th International Conference on Emerging Trends in Mechanical & Industrial Engineering (ICETMIE-2022) organized by the Department of Mechanical Engineering, The NorthCap University, Gurugram on 4 -5 March 2022. | CFD Investigation of Rewetting behavior on a Hot Vertical Plate Surface with Coolant Jet Impingement | NA |
Book/Chapters Written
Type (Book/Chapter) | Author(s) | Title | Publisher | ISBN/ISSN No. | Year |
---|---|---|---|---|---|
Book | • K.M. Pandey and A. Debbarma | CFD Analysis of Flow and Heat Transfer in Sub-Channels of HPLWR | LAP Lambert Academic Publishing | 978-3-659-40788-8 | 2013 |
Research Supersion
Programme Name | Scholar Name | Research Topic | Status | Year | Co-Superivisor(s) |
---|---|---|---|---|---|
M.Tech | D.Lavakishan | Rewetting Behaviour | Completed | 2019-2020 | |
M.Tech | Himanshu | HEAT TRANSFER CHARACTERISTICS | Completed | 2020-2021 | |
Ph.D | Sohan sharma | Thermal Storage System | Ongoing | 2020- | |
M.Tech | Kartik Kumar | Solar Air Heater | Completed | 2020-2021 | |
M.Tech | Supern Swapnil | Boiling Heat Transfer | Ongoing | 2022 | |
M.Tech | NITESH KUMAR | Solar Air Heater-Jet impingement | Ongoing | 2022 | |
M.Tech | ANURAG DIXIT | Solar PV Cooling-Turbo Ventilator | Ongoing | 2022 |
Patents
Name | Reg./Ref.No. | Date of Award/Filling | Awarding Agencies | Status |
---|
Conferences/Workshop/Courses Organized
Category | Type | Title | Venue | From | To | Designation |
---|---|---|---|---|---|---|
workshop | e-Workshop | Modeling and Simulation in Thermal Engineering | NIT Hamirpur | 30/10/2020 | 03/11/2020 | Coordinator Cum Treasurer |
stc | e-STC | Emerging Aspects in Refrigeration, HVAC and Liquefaction Technologies | NIT Hamirpur | 03/01/2022 | 07/01/2022 | Coordinator |
Expert Talks
Title | Place | Year | Description of Event |
---|---|---|---|
Mesh Generation with ANSYS Meshing | Department of Mechanical Engineering, N.I.T. Srinagar | 2020 | One Week Online Short-Term Training Program on "Computational Fluid Dynamics" (17-22 August, 2020) |
Post Processing of ANSYS Results | Department of Mechanical Engineering, N.I.T. Srinagar | 2020 | One Week Online Short-Term Training Program on "Computational Fluid Dynamics" (17-22 August, 2020) |
Modeling and Simulation : Rewetting | Department of Mechanical Engineering, N.I.T. Hamirpur | 2020 | e-workshop on " Modeling and Simulation in Thermal Engineering: (30 Oct.,-03 Nov., 2020) |
Consultancy
Title of Consultancy | Client Organization | Faculty Involved | Amount(INR) | Status |
---|
International and National Exposure
Sr.No. | Title | Description |
---|
Honors & Recognitions Achieved
Sr.No. | Title | Activity | Given By | Year |
---|